How to Reload a Cue-Mate and prepare a 1-Pod Cue-Mate
How to reload a Cue-Mate
You should reload your Cue-Mate in a well-ventilated area, wearing gloves. To reload a Cue-Mate, take a wishbone that has already been used.
Check the tail for any imperfections. If so, replace the tail by pushing the existing tail up, and removing from the wishbone. Then take a new tail, thread it through the hole and pull down firmly.
Take a reload pod, push onto the end of the wishbone until the tip of the wishbone goes into the pocket at the end of the pod. Repeat on the other side of the wishbone.
Then you have a reloaded Cue-Mate.
How to prepare a 1-Pod Cue-Mate
You should reload your 1-Pod Cue-Mate in a well-ventilated area, wearing gloves.
To prepare a 1-Pod Cue-Mate, start with a new Cue-Mate device and pull one of the progesterone impregnated pods off. Take a blank silicone pod and push onto the end of the wishbone ensuring the tip of the pod goes into the pocket at the end of the pod.
You now have a 1-Pod Cue-Mate.
For more information about Cue-Mate visit our product information page or contact us at firstname.lastname@example.org.